HP Color LaserJet CM2320 HP Color LaserJet CM2320 MFP Series - Software Techni - Page 286

Paper Size Change the width and height values by typing numeric strings into the edit boxes in the Paper Size group box. Any entry that is greater than the maximum limits of the width and height edit box is rounded down to the maximum valid entry. Any entry that is smaller than the minimum limits of the width and height edit box is rounded up to the minimum valid entry. If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated when the focus has changed. The resolution of each edit box is 1 millimeter or 1/10 of an inch, depending on the current measurement units. Units To change measurement units, click one of the options in the Units group box (either Inches or Millimeters). Custom width and height control limits The minimum media size for the HP Color LaserJet CM2320 MFP Series printer is 76.2 x 127 mm (3 x 5 in) and the maximum is 215.9 x 355.6 mm (8.5 x 14 in). The following table summarizes media size limits. The following table identifies the media types the HP Color LaserJet CM2320 MFP Series printer supports in trays 1 and 2. Table 6-5 Tray 1 and Tray 2 Specifications Tray 1 and Tray 2 Dimensions1 Weight Capacity2 Paper Minimum: 76 x 127 mm (3 x 5 in) Maximum: 216 x 356 mm 60 to 163 g/m2 (16 to 43 lb) Up to 176 g/m2 (47 lb) for postcards Single sheet of 75 g/m2 (20 lb) paper for Tray 1 Up to 250 sheets for Tray 2 (8.5 x 14 in) 262 Chapter 6 Engineering details ENWW