HP Color LaserJet CM2320 HP Color LaserJet CM2320 MFP Series - Software Techni - Page 287
Paper Source:, Paper type:, Device Settings, Automatically Select, Printer auto select
View all HP Color LaserJet CM2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
Engineering details Table 6-5 Tray 1 and Tray 2 Specifications (continued) Tray 1 and Tray 2 Dimensions1 Weight Capacity2 HP LaserJet glossy paper Same as the preceding listed 75 to 220 g/m2 (20 to 58 lb) and HP LaserJet photo minimum and maximum sizes. paper Single sheet of HP LaserJet glossy paper or HP LaserJet photo paper for Tray 1 HP Premium Cover Paper3 200 g/m2 (53 lb) cover Up to 25 mm (0.99 in) stack height for Tray 2 Single sheet of HP Cover paper for Tray 1 Up to 25 mm (0.99 in) stack height for Tray 2 Transparencies and opaque film Thickness: 0.10 to 0.13 mm (3.9 to 5.1 mils) Single sheet of transparency or opaque film for Tray 1 Up to 50 sheets for Tray 2 Labels4 Thickness: up to 0.23 mm (up Single sheet of labels for Tray to 9 mils) 1 Up to 25 mm (0.99 in) stack height for Tray 2 Envelopes Up to 90 g/m2 (up to 24 lb) Single envelope for Tray 1 Up to ten envelopes for Tray 2 1 The product supports a wide range of standard and custom sizes of paper. Check the printer-driver for supported sizes. 2 Capacity can vary depending on paper weight and thickness, and environmental conditions. 3 Smoothness: 100 to 250 (Sheffield). 4 Hewlett-Packard does not guarantee results when printing with other types of heavy paper. Paper Source: The Paper source: setting specifies the source tray to use for printing a document. The list of source trays depends on the product accessories that are installed. Any optional source trays that are installed through the Device Settings tab also appear here. The Paper source: drop-down menu can contain the following options: ● Automatically Select ● Printer auto select ● Manual Feed in Tray 1 ● Tray 1 The default setting is Automatically Select. When this is selected, the HP Color LaserJet CM2320 MFP Series product uses the source tray that supports the selected paper size. For the other options, make sure that the correct paper size is loaded in the source tray. Paper type: The Paper type: drop-down menu shows a selection of the paper types that the HP Color LaserJet CM2320 MFP Series product supports. When you use the default setting, Unspecified, the product uses the default paper type, which is usually Plain. ENWW Paper/Quality tab features 263