HP Designjet 8000 HP Designjet 8000s Printer Series - User's Guide - Page 19
Power supply, Printer, Regular inspection and maintenance, Consumables - printhead repair
View all HP Designjet 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Introduction Handling precautions These precautions are recommended to avoid damage to your printer and its components. Power supply ● Use the power supply voltage specified on the nameplate. ● Check the printer electrical outlet for proper polarity and grounding before connecting printer. Failure to do so may result in fire and electric shock hazards. ● Be sure the printer is well-grounded. Failure to ground the printer may result in electrical shock, fire, and susceptibility to electromagnetic interference. ● Avoid overloading the printer's electrical outlet with multiple devices. ● Use only the electrical cable supplied by HP with the printer. Printer ● Wipe the printer clean with a soft cloth. A cloth moistened with a neutral detergent may be used. Do not allow liquid to enter the printer. This may create risk of fire and electrical shock and cause a malfunction. Do not clean the printer with benzene or paint thinner. This may damage the paint. ● Never touch the printhead nozzles. They can be easily damaged or clogged. Regular inspection and maintenance ● Make sure you observe the appropriate maintenance guideline. See How do I maintain the printer. ● Clean the capping unit every day. ● Never switch off the printer without following the correct procedures. Even with the storage liquid installed, never leave the printer off for more than 4 weeks. Leaving your printer off for more than 4 weeks can cause permanent damage that cannot be repaired. In all other cases make sure you observe the appropriate maintenance guidelines. Consumables ● Ink inside the ink cartridge is combustible. Do not expose or store near open flames, sparks, or other sources of ignition. ● HP Ink Cartridges should be installed before the "Install By" date printed on the cartridge. Use of the Ink Cartridge 3 months beyond the "Install By" date may cause deterioration in print quality or a printer malfunction. ● Do not disassemble the ink cartridges. Ink cartridges are intended for single use only. ● Avoid contact between ink and skin, eyes, and clothing. ● Immediately wash skin with soapy water. ● Remove clothing soaked with ink from contact with skin. ● Use an approved eye wash station if ink is splashed into eyes and consult a doctor if necessary. If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor if necessary. ENWW Handling precautions 9