HP Designjet 8000 HP Designjet 8000s Printer Series - User's Guide - Page 56
Set the take-up reel winding direction
![]() |
View all HP Designjet 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
There are four tasks required to complete loading of media on the take-up reel: The first part of attaching a roll to the take-up reel is attaching the end of the roll (by tape) to the core tube supplied with the take-up reel. You can also use an empty cardboard tube. Both types of core must be the same length as the roll you are using. ● Set the take-up reel for clockwise or anti-clockwise winding. ● Define the winding mode. ● Load media onto the take-up reel. ● Calibrate media advance. Set the take-up reel winding direction Winding for printing on the outside of the roll (3) or the inside of the roll (2) can be selected. When the takeup reel is not used, set the take-up reel switch to off (1). NOTE For LOOSE winding mode, make sure that the media passes inside the take-up reel sensor (1). If the take-up reel is not used, turn the take-up reel switch off. Make sure that you change the media roll on the take-up reel before the roll size exceeds the diameter of the take-up reel media hub. Replace the core tube with a new one to avoid winding errors. How do I load/unload media 46 Chapter 3 How do I load/unload media ENWW
![](/manual_guide/products/hewlettpackard-designjet-8000-hp-designjet-8000s-printer-series-users-guide-2b25fa1/56.png)