HP Deskjet 1000c HP DeskJet 1000C Professional Series Printer - (English) User - Page 25

• You have chosen Manual Feed in the printer driver software. The printer is waiting for you to feed paper in from the rear of the printer. • Paper is jammed in the printer. To clear the paper jam, see page 3-4, "When Paper Is Jammed in the Printer." Resume and Power lights are blinking together. • The movement of the print cartridge cradle is obstructed. Open the printer cover and clear any obstructions. See page 1-3, "Step 4 - Installing Print Cartridges." Power light is on, but nothing prints. • Printer driver is still preparing data to be sent to your printer. Wait a few more minutes for the printer to respond. • Printer is not in the ready-to-print state. Press the Resume button. If the Resume light blinks, check the error message on your screen for instructions. • Printer driver name does not appear in the Installed Printers list in the Printers Control Panel. Close all open software programs. Restart your computer and reinstall your the printer software. • Wrong printer driver is selected. Select the correct printer driver. • Printer is improperly connected to the computer. Make sure the cable is firmly connected to the printer and the computer. • Software program is not set up for the printer. In your software program documentation, follow the instructions for setting up the software to work with your printer. • Bad printer cable, cable connections or computer port. Try using another printer cable. Solving Problems 3-3