HP Deskjet F4500 User Guide - Page 58
Copy troubleshooting, Parts of the original do not appear or are cut off - installation software
View all HP Deskjet F4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 9 NOTE: If you are using HP Photosmart Essential, the Optical Character Recognition (OCR) software might not be installed on your computer. To install the OCR software, you must re-insert the software disk and select Install More Software, then choose the OCR option. Cause: The scan document settings were not set to the correct optical character recognition (OCR) language. The OCR language tells the software how to interpret the characters it sees in the original image. If the OCR language does not match the language in the original, the scanned text might be incomprehensible. Copy troubleshooting Use this section to solve these copy problems: • Parts of the original do not appear or are cut off • The printout is blank Parts of the original do not appear or are cut off Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Place the original correctly on the glass • Solution 2: Clean the scanner glass Solution 1: Place the original correctly on the glass Solution: Load your original print side down on the right front corner of the glass. Solve a problem Cause: The original was placed incorrectly on the glass. If this did not solve the issue, try the next solution. 56 Solve a problem