HP Dx5150 Troubleshooting Guide - Page 66
POST Numeric Codes and Text Messages - cpu
UPC - 882780485433
View all HP Dx5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
POST Error Messages POST Numeric Codes and Text Messages This section covers those POST errors that have numeric codes associated with them. The section also includes some text messages that may be encountered during POST. ✎ The computer will beep once after a POST text message is displayed on the screen. Numeric Codes and Text Messages Code/Message Probable Cause BIOS ROM checksum error-System halted The checksum of the BIOS code in the BIOS chip is incorrect, indicating that the BIOS code may have become corrupt. CMOS battery failed The CMOS battery is no longer functional. CMOS checksum error-Defaults loaded Checksum of CMOS is incorrect, so the system loads the default equipment configuration. A checksum error may indicate that CMOS has become corrupt. A weak battery may have caused this error. CPU at nnnn Displays the running speed of the CPU. Press ESC to skip memory test HARD DISK INSTALL FAILURE Cannot find or initialize the hard drive controller or the drive. Recommended Action Contact your system dealer to replace the BIOS. Contact your system dealer for a replacement battery. Check the battery and replace, if necessary. None. The user may press Esc. to skip the full memory test. Make sure the controller is installed correctly. If no hard drives are installed, be sure the Hard Drive selection in Setup is set to NONE. A-2 www.hp.com Troubleshooting Guide