HP ENVY 14t-2000 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 47
Remove the mass storage device, If it is necessary to replace the mass storage device bracket
View all HP ENVY 14t-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Remove the mass storage device: 1. Remove the four Phillips PM2.0×2.83 screws that secure the mass storage device to the computer. 2. Use the tab (1) to slide the mass storage device to the right and disconnect it from the system board. 3. Lift the mass storage device (2) out of the mass storage device bay. 4. If it is necessary to replace the mass storage device bracket, remove the four Phillips PM3.0×3.37 screws (1) that secure the bracket to the mass storage device. Component replacement procedures 39
Remove the mass storage device:
1.
Remove the four Phillips PM2.0×2.83 screws that secure the mass storage device to the computer.
2.
Use the tab
(1)
to slide the mass storage device to the right and disconnect it from the
system board.
3.
Lift the mass storage device
(2)
out of the mass storage device bay.
4.
If it is necessary to replace the mass storage device bracket, remove the four Phillips PM3.0×3.37
screws
(1)
that secure the bracket to the mass storage device.
Component replacement procedures
39