HP ENVY 14t-2000 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 72
until it rests at an angle., Removal and replacement procedures
View all HP ENVY 14t-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
6. Release the power extension cord (4) from the system board. (The power extension cord is attached to the system board with double-sided tape.) 7. Remove the five Phillips PM2.5×3.83 screws that secure the system board to the base enclosure. 8. Lift the left side of the system board (1) until it rests at an angle. 64 Chapter 4 Removal and replacement procedures
6.
Release the power extension cord
(4)
from the system board. (The power extension cord is
attached to the system board with double-sided tape.)
7.
Remove the five Phillips PM2.5×3.83 screws that secure the system board to the base enclosure.
8.
Lift the left side of the system board
(1)
until it rests at an angle.
64
Chapter 4
Removal and replacement procedures