HP ENVY 15-bp100 Maintenance and Service Guide 1 - Page 39
TouchPad cable, disconnect the TouchPad cable from the system board.
View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
TouchPad cable NOTE: The TouchPad cable is available using spare part number L53534-001. Before removing the TouchPad cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Remove the battery (see Battery on page 26). Remove the TouchPad cable: 1. Release the zero insertion force (ZIF) connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Release the ZIF connector (2) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the TouchPad. 3. Remove the TouchPad cable (3). Reverse this procedure to install the TouchPad cable. Component replacement procedures 31