HP ENVY 15-bp100 Maintenance and Service Guide 1 - Page 46

Card reader board cable

Get HP ENVY 15-bp100 PDF manuals and user guides View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Card reader board cable NOTE: The card reader board cable is available using spare part number L53535-001. Before removing the card reader board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Remove the battery (see Battery on page 26). Remove the card reader board cable: 1. Release the ZIF connector (1) to which card reader board cable is connected, and then disconnect the card reader board cable from the system board. 2. Release the ZIF connector (2) to which card reader board cable is connected, and then disconnect the card reader board cable from the switch board. 3. Remove the card reader board cable (3). Reverse this procedure to install the card reader board cable. 38 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Card reader board cable
NOTE:
The card reader board cable is available using spare part number L53535-001.
Before removing the card reader board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
25
).
5.
Remove the battery (see
Battery
on page
26
).
Remove the card reader board cable:
1.
Release the ZIF connector
(1)
to which card reader board cable is connected, and then disconnect the card
reader board cable from the system board.
2.
Release the ZIF connector
(2)
to which card reader board cable is connected, and then disconnect the card
reader board cable from the switch board.
3.
Remove the card reader board cable
(3)
.
Reverse this procedure to install the card reader board cable.
38
Chapter 5
Removal and replacement procedures