HP ENVY 15-bp100 Maintenance and Service Guide 1 - Page 58
Heat sink, and then remove the following components
View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Heat sink Table 5-14 Heat sink description and spare part number information Description Heat sink (includes fan cables and replacement thermal material) Spare part number L53867-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 25), and then remove the following components: a. Battery (see Battery on page 26) b. Solid-state drive (see Solid-state drive on page 28) c. Fans (see Fans on page 40) d. System board (see System board on page 47) Remove the heat sink: 1. Remove the foil shield (1) to gain access to the heat sink screws. 2. Remove the four Phillips M2.0×3.0 screws (2) that secure the heat sink to the system board. 3. Remove the heat sink (3). 50 Chapter 5 Removal and replacement procedures