HP ENVY 15-bp100 Maintenance and Service Guide 1 - Page 62
Speakers, Battery see
View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Speakers Table 5-16 Speakers description and spare part number information Description Speaker Kit (includes left and right speakers, cables, and rubber isolators) Spare part number L53561-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 25), and then remove the following components: a. Battery (see Battery on page 26) b. Solid-state drive (see Solid-state drive on page 28) c. Fans (see Fans on page 40) d. System board (see System board on page 47) Remove the speakers: 1. Release the power connector cable from the retention clips (1) and routing channel built into the left speaker. 2. Release the speaker cable from the retention clips (2) and routing channel built into the keyboard/ top cover. 54 Chapter 5 Removal and replacement procedures