HP ENVY TouchSmart 14-k020us HP Envy 14 Sleekbook - Maintenance and Service Gu - Page 50
Hard drive, Remove the 4 Phillips PM2.5×3.5 screws
View all HP ENVY TouchSmart 14-k020us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Hard drive Description 1-TB, 5400 rpm, 2.5 in 1-TB, 5400 rpm, 2.5 in, hybrid (8-GB integrated flash memory) 750-GB, 5400 rpm, 2.5 in 750-GB, 5400 rpm, 2.5 in, hybrid (8-GB integrated flash memory) 500-GB, 5400 rpm, 7 mm 500-GB, 5400 rpm, 7 mm, hybrid (8-GB integrated flash memory) Hard Drive Hardware Kit (includes left and right brackets, hard drive cable, and screws) Spare part number 676521-001 731999-001 634250-001 732001-001 683802-001 732000-001 741683-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 37). 5. Disconnect the battery cable (see Battery on page 39). Remove the hard drive: 1. Remove the 4 Phillips PM2.5×3.5 screws (1) that secure the hard drive to the computer. 2. Lift the hard drive enough to gain access to the hard drive connector cable (2) 42 Chapter 4 Removal and replacement procedures