HP ENVY TouchSmart 14-k020us HP Envy 14 Sleekbook - Maintenance and Service Gu - Page 72
Power button board, Remove the Phillips PM2.5×3.5 screw
View all HP ENVY TouchSmart 14-k020us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Power button board Description Power button board (includes cable) Spare part number 727504-001 Before removing the Power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 37). 5. Remove the battery (see Battery on page 39). 6. Remove the fan (see Fan on page 55). 7. Remove the card reader board (see Card reader board on page 54). 8. Remove the system board (see System board on page 57). Remove the power button board and cable: 1. Remove the Phillips PM2.5×3.5 screw (1) and the Phillips PM2.5×5.5 screw (2) that secures the right hinge to the computer. 2. Rotate the hinge upward to gain access to the power button board (3). 64 Chapter 4 Removal and replacement procedures