HP ENVY TouchSmart 14-k020us HP Envy 14 Sleekbook - Maintenance and Service Gu - Page 63
Fan
View all HP ENVY TouchSmart 14-k020us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3. Lift up on the board to disconnect the connector on the bottom of the board from the system board, and then remove the card reader board from the computer (3). Fan Reverse this procedure to install the card reader board. Description Fan Spare part number 725445-001 Before removing the fan: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the fan: 1. Disconnect the fan cable from the system board (1). 2. Remove the power connector cable that routes through the clip on the side of the fan (2). Component replacement procedures 55