HP ENVY TouchSmart m6-k125dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 40
Battery, Remove the 4 Phillips PM2.5×3.5 screws
View all HP ENVY TouchSmart m6-k125dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Battery Description 3 cell, 50 WHr 4.52 AH Li-ion battery Spare part number 715050-001 Before removing the battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 30). Remove the battery: 1. Turn the computer right-side up, with the front toward you. 2. Disconnect the battery cable (1) from the system board. 3. Remove the 4 Phillips PM2.5×3.5 screws (2) that secure the battery to the top cover. 4. Remove the battery from the computer (3). Reverse this procedure to install the battery. 32 Chapter 4 Removal and replacement procedures