HP ENVY TouchSmart m6-k125dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 66
Display assembly, non-touchscreen, Remove the system board see
View all HP ENVY TouchSmart m6-k125dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Display assembly, non-touchscreen Description Display assembly, FHD, non-touch Display assembly, HD, non-touch Spare part number 727461-001 727462-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Remove the battery (see Battery on page 32), 6. Remove the fan (see Fan on page 45). 7. Remove the card reader board (see Card reader board on page 44). 8. Remove the system board (see System board on page 47). Remove the display assembly: 1. Remove the 3 Phillips PM2.5×5.5 screws from the hinges (2 from the left, 1 from the right hinge) (1). 2. Remove the Phillips PM2.5×3.5 screw from right hinge (2). 3. Rotate both hinges to the open position (3). 58 Chapter 4 Removal and replacement procedures