HP ENVY TouchSmart m6-k125dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 73
and the 5 Phillips PM 2.5×2.5 broadhead screws from the, bottom of the hinge
View all HP ENVY TouchSmart m6-k125dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
7. If you need to replace the webcam module from the display enclosure, lift the webcam up to disengage the adhesive tape that secures the webcam to the enclosure (1), and then disconnect the webcam cable (2). 8. If you need to remove the display hinges, from each hinge remove the 3 Phillips PM 2.0x2.5 screws from the side of the hinge (1) and the 5 Phillips PM 2.5×2.5 broadhead screws from the bottom of the hinge (2). 9. Remove the hinges from the display panel assembly (3). Component replacement procedures 65
7.
If you need to replace the webcam module from the display enclosure, lift the webcam up to
disengage the adhesive tape that secures the webcam to the enclosure
(1)
, and then disconnect
the webcam cable
(2)
.
8.
If you need to remove the display hinges, from each hinge remove the 3 Phillips PM 2.0x2.5
screws from the side of the hinge
(1)
and the 5 Phillips PM 2.5×2.5 broadhead screws from the
bottom of the hinge
(2)
.
9.
Remove the hinges from the display panel assembly
(3)
.
Component replacement procedures
65