HP ENVY TouchSmart m6-k125dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 47
Memory modules, Spread the retaining tabs
View all HP ENVY TouchSmart m6-k125dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Memory modules Description 2-GB memory module (PC3L, 12800, 1600-MHz) 4-GB memory module (PC3L, 12800, 1600-MHz) 8-GB memory module (PC3L, 12800, 1600-MHz)(Intel models only) Spare part number 691739-005 691740-005 693374-005 Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Disconnect the battery cable (see Battery on page 32). Remove the memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 2. Remove the memory module (2) by pulling the module away from the slot at an angle. Reverse this procedure to install a memory module. Component replacement procedures 39