HP ENVY x2 - 13-j012dx HP ENVY x2 (model numbers 13- j000 through 13-j099) Mai - Page 31
Battery, Disconnect the battery cable
View all HP ENVY x2 - 13-j012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5. Remove the hinge covers (2) and the hinges (3). The hinge covers are available using spare part number 787286-001. The hinges are available using spare part number 787265-001. Reverse this procedure to reassemble and install the stand. Battery Description 2-cell, 33-WHr, 4.58-AHr, Li-ion Spare part number 776621-006 Before removing the battery, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 22). Remove the battery: 1. Detach the wireless antenna transceivers (1) from the battery. (The wireless antenna transceivers are attached to the battery with double-sided adhesive.) 2. Disconnect the battery cable (2) from the system board. 3. Remove the eleven Phillips PM1.9×3.3 screws (3) that secure the battery to the display panel assembly. Component replacement procedures 25