HP ENVY x2 - 13-j012dx HP ENVY x2 (model numbers 13- j000 through 13-j099) Mai - Page 34
Docking port board, Remove the Philllips PM1.9×3.3 screw
View all HP ENVY x2 - 13-j012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3. Remove the Philllips PM1.9×3.3 screw (3) that secures the power button board to the display panel assembly. 4. Remove the power button board (4). Reverse this procedure to install the power button board. Docking port board Description Docking port board (includes cable) Spare part number 787268-001 Before removing the docking port board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the back cover (see Back cover on page 22). 5. Disconnect the battery cable from the system board (see Battery on page 25). Remove the docking port board: 1. Release the ZIF connector (1) to which the docking port board cable is attached, and then disconnect the docking port board cable from the system board. 28 Chapter 5 Removal and replacement procedures