HP ENVY x2 - 13-j012dx HP ENVY x2 (model numbers 13- j000 through 13-j099) Mai - Page 38
Volume button board
View all HP ENVY x2 - 13-j012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
2. Remove the solid-state drive (2) by pulling the module away from the slot at an angle. Reverse this procedure to install the solid-state drive. Volume button board Description Volume button board (includes cable) Spare part number 787269-001 Before removing the volume button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the back cover (see Back cover on page 22). 5. Disconnect the battery cable from the system board (see Battery on page 25). 32 Chapter 5 Removal and replacement procedures