HP Elite 7100 Hardware Reference Guide - HP Elite 7100 Series Microtower PCs - Page 10
Removing the Front Bezel
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Removing the Front Bezel 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Press outward on the three latches on the right side of the bezel (1), then rotate the right side of the bezel off the chassis (2) followed by the left side. Figure 3 Removing the Front Bezel 4 Hardware Upgrades ENWW