HP Elite 7100 Hardware Reference Guide - HP Elite 7100 Series Microtower PCs - Page 17
Removing a PCI Express x1 Expansion Card
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, you must slide one of the expansion slot covers up and out of the chassis or use a flatblade screwdriver to pry out one of the metal shields on the rear panel that covers the expansion slot. Be sure to remove the appropriate shield for the expansion card you are installing. Figure 8 Removing an Expansion Slot Cover b. If you are removing a PCI Express x1 card, hold the card at each end and carefully rock it back and forth until the connectors pull free from the socket. Be sure not to scrape the card against the other components. Figure 9 Removing a PCI Express x1 Expansion Card ENWW Removing or Installing an Expansion Card 11