HP Elite 7100 Hardware Reference Guide - HP Elite 7100 Series Microtower PCs - Page 32
CAUTION, Installing the Hard Drive Cage
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3. Connect the power cable (1) and data cable (2) to the back of the hard drive. Figure 27 Connecting the Hard Drive Cables CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. 4. Place the hard disk drive cage into the chassis (1), then slide it down toward the bottom of the chassis until it locks into place (2). Figure 28 Installing the Hard Drive Cage 26 Hardware Upgrades ENWW
3.
Connect the power cable (1) and data cable (2) to the back of the hard drive.
Figure 27
Connecting the Hard Drive Cables
CAUTION:
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
sharp bend can break the internal wires.
4.
Place the hard disk drive cage into the chassis (1), then slide it down toward the bottom of the
chassis until it locks into place (2).
Figure 28
Installing the Hard Drive Cage
26
Hardware Upgrades
ENWW