HP Elite 7100 Hardware Reference Guide - HP Elite 7100 Series Microtower PCs - Page 35
Type 1, Removing and Replacing a Coin Cell Battery Type 2
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Type 1 a. Lift the battery out of its holder. Figure 30 Removing a Coin Cell Battery (Type 1) b. Slide the replacement battery into position, positive side up. The battery holder automatically secures the battery in the proper position. Type 2 a. To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. When the battery pops up, lift it out (1). b. To insert the new battery, slide one edge of the replacement battery under the holder's lip with the positive side up. Push the other edge down until the clamp snaps over the other edge of the battery (2). Figure 31 Removing and Replacing a Coin Cell Battery (Type 2) Type 3 a. Pull back on the clip (1) that is holding the battery in place, and remove the battery (2). ENWW Battery Replacement 29