HP Elite 7100 Hardware Reference Guide - HP Elite 7100 Series Microtower PCs - Page 36
Removing a Coin Cell Battery Type 3
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
b. Insert the new battery and position the clip back into place. Figure 32 Removing a Coin Cell Battery (Type 3) NOTE: After the battery has been replaced, use the following steps to complete this procedure. 8. Replace the computer access panel. 9. Plug in the computer and turn on power to the computer. 10. Reset the date and time, your passwords, and any special system setups using Computer Setup. 11. Lock any security devices that were disengaged when the access panel was removed. 30 Hardware Upgrades ENWW
b.
Insert the new battery and position the clip back into place.
Figure 32
Removing a Coin Cell Battery (Type 3)
NOTE:
After the battery has been replaced, use the following steps to complete this procedure.
8.
Replace the computer access panel.
9.
Plug in the computer and turn on power to the computer.
10.
Reset the date and time, your passwords, and any special system setups using Computer Setup.
11.
Lock any security devices that were disengaged when the access panel was removed.
30
Hardware Upgrades
ENWW