HP Elite 7100 Maintenance & Service Guide: HP Elite 7100 Series Microtower - Page 37
Access Panel, Removing the Computer Access Panel
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Access Panel 1. Prepare the computer for disassembly (Preparation for Disassembly on page 28). 2. Remove the screw (1) that secures the access panel to the computer chassis. 3. Slide the access panel back (2) about 1.3 cm (1/2 inch), then lift it off the unit. NOTE: You may want to lay the computer on its side to install internal parts. Be sure the side with the access panel is facing up. Figure 7-2 Removing the Computer Access Panel To replace the access panel, reverse the removal steps. Access Panel 29
Access Panel
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
28
).
2.
Remove the screw
(1)
that secures the access panel to the computer chassis.
3.
Slide the access panel back
(2)
about 1.3 cm (1/2 inch), then lift it off the unit.
NOTE:
You may want to lay the computer on its side to install internal parts. Be sure the side
with the access panel is facing up.
Figure 7-2
Removing the Computer Access Panel
To replace the access panel, reverse the removal steps.
Access Panel
29