HP Elite 7100 Maintenance & Service Guide: HP Elite 7100 Series Microtower - Page 55
Removing an External 3.5-inch Drive, CAUTION
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
9. Connect the power cable (1) and data cable (2) to the rear of the optical drive. Figure 7-20 Connecting the Power and Data Cables 10. Replace the front bezel and access panel. 11. Reconnect the power cord and turn on the computer. 12. Lock any security devices that were disengaged when the access panel was removed. The system automatically recognizes the drive and reconfigures the computer. Removing an External 3.5-inch Drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. NOTE: The 3.5-inch drive bay may contain a media card reader. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 28). 2. Remove the access panel (Access Panel on page 29). 3. Remove the front bezel (Front Bezel on page 30). Drives 47