HP Elite 7100 Maintenance & Service Guide: HP Elite 7100 Series Microtower - Page 46
Removal and Replacement Procedures Microtower MT Chassis, Removing a PCI Express x1 Expansion Card
View all HP Elite 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
b. If you are removing a PCI Express x1 card, hold the card at each end and carefully rock it back and forth until the connectors pull free from the socket. Be sure not to scrape the card against the other components. Figure 7-10 Removing a PCI Express x1 Expansion Card c. If you are removing a PCI Express x16 card, pull the retention arm on the back of the expansion socket away from the card and carefully rock the card back and forth until the connectors pull free from the socket. Be sure not to scrape the card against the other components. Figure 7-11 Removing a PCI Express x16 Expansion Card 6. Store the removed card in anti-static packaging. 7. If you are not installing a new expansion card, install an expansion slot cover to close the open slot. 38 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis