HP EliteBook 755 Maintenance and Service Guide - Page 65
Speaker assembly, and then remove the cable from the clip
View all HP EliteBook 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Speaker assembly Description Speaker assembly (includes cable) Spare part number L14368-001 Before removing the speaker assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 34). 5. Disconnect the battery cable from the system board (see Battery on page 47). Remove the speaker assembly: 1. Disconnect the speaker cable from the system board (1), and then remove the cable from the clip (2). 2. Remove the two Phillips M2.0×2.5 screws (3) that secure the speaker to the computer. 3. Remove the speaker from the computer (4). Reverse this procedure to install the speaker. Component replacement procedures 55