HP EliteBook 755 Maintenance and Service Guide - Page 79

To remove the display bezel, middle s of the hinge cover until it snaps into place.

Get HP EliteBook 755 PDF manuals and user guides View all HP EliteBook 755 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

8. To remove the display hinge cover, rotate top of hinge cover away from display enclosure to disengage the tabs (1), and then pull the cover off the enclosure (2). The display hinge cover (for non-privacy displays) is available in the Hinge Kit (for touch displays) using spare part number L14364-001. The display hinge cover (for non-touch displays) is available using spare part number L14365-001. When installing the hinge cover, make sure all cables are routed correctly under the hinge cover and the hooks on the end of the cover are aligned correctly with the snaps on the bottom of the display (1). Press the left (2), and then right (3) middle sections of the hinge cover until it snaps into place. 9. To remove the display bezel, flex the top (1) of the bezel, the inside edges of the left and right sides (2), and then the bottom (3) of the bezel until it disengages from the display enclosure. Component replacement procedures 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
8.
To remove the display hinge cover, rotate top of hinge cover away from display enclosure to disengage
the tabs
(1)
, and then pull the cover
off
the enclosure
(2)
.
The display hinge cover (for non-privacy displays) is available in the Hinge Kit (for touch displays) using
spare part number L14364-001. The display hinge cover (for non-touch displays) is available using spare
part number L14365-001.
When installing the hinge cover, make sure all cables are routed correctly under the hinge cover and the
hooks on the end of the cover are aligned correctly with the snaps on the bottom of the display
(1)
.
Press the left
(2)
, and then right
(3)
middle sections of the hinge cover until it snaps into place.
9.
To remove the display bezel,
flex
the top
(1)
of the bezel, the inside edges of the left and right sides
(2)
,
and then the bottom
(3)
of the bezel until it disengages from the display enclosure.
Component replacement procedures
69