HP EliteBook 755 Maintenance and Service Guide - Page 72
Fan, Remove the four Phillips M2.0×3.0 screws that secure the fan to the computer.
View all HP EliteBook 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Fan Description Fan Spare part number L22307-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 34). 5. Remove the battery (see Battery on page 47). 6. Remove the keyboard (see Keyboard on page 43). Remove the fan: NOTE: To remove the fan you must remove screws from both the top (under the keyboard) and bottom of the computer. 1. Position the computer upright and open as far as possible. 2. Remove the four Phillips M2.0×3.0 screws that secure the fan to the computer. 3. Close the computer and position it upside down. 4. Disconnect the fan cable from the system board (1). 5. Remove the Phillips M2.0×3.0 screw (2) that secures the fan to the computer. 6. Loosen the two captive Phillips screws (3) that secure the fan to the computer. 62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts