HP GbE2c HP GbE2c Layer 2/3 Ethernet Blade Switch for c-Class BladeSystem User - Page 40

Serial upgrade of operating system firmware, procedure

Get HP GbE2c - Blc Layer 2/3 Fiber SFP Option PDF manuals and user guides
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

CAUTION: Do not power off the switch until the message: "Change your baud rate to 9600 bps and power cycle the switch," is displayed, otherwise, the switch will be inoperable. 10. Change the baud rate to 9600 and power off the switch, wait for a few seconds, and power on the switch. The switch boots with the new version of the boot code image that was just downloaded. Serial upgrade of operating system firmware procedure To perform a serial upgrade of the switch operating system firmware image, usually named pGbE2c_100.bin: 1. Using the null modem cable, connect the console port of the switch to the serial port of a PC that supports XModem/1K XModem. 2. Start HyperTerminal (part of Microsoft Windows) or equivalent terminal emulation application (depending on the computer operating system) and set the parameters for terminal emulation console: Parameter Baud rate Data bits Parity Stop bits Flow control Value 9600 8 None 1 None 3. Power on the switch. 4. Hold down the Shift key and press the D key repeatedly during the Memory Test, until this message appears: Performing a serial download 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Performing a serial download
40
CAUTION:
Do not power off the switch until the message: "Change your baud rate to 9600
bps and power cycle the switch," is displayed, otherwise, the switch will be inoperable.
10.
Change the baud rate to 9600 and power off the switch, wait for a few seconds, and power on the
switch.
The switch boots with the new version of the boot code image that was just downloaded.
Serial upgrade of operating system firmware
procedure
To perform a serial upgrade of the switch operating system firmware image, usually named
pGbE2c_100.bin
:
1.
Using the null modem cable, connect the console port of the switch to the serial port of a PC that
supports XModem/1K XModem.
2.
Start HyperTerminal (part of Microsoft Windows) or equivalent terminal emulation application
(depending on the computer operating system) and set the parameters for terminal emulation
console:
Parameter
Value
Baud rate
9600
Data bits
8
Parity
None
Stop bits
1
Flow control
None
3.
Power on the switch.
4.
Hold down the Shift key and press the D key repeatedly during the Memory Test, until this message
appears: