HP Indigo WS6000 Writing Head Service Instructions -- CA393-00150Document P/N: - Page 12
Color adjust
View all HP Indigo WS6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Figure 2-9 Writing Head and Paper handling skew calibration job (for the HP Indigo 7000 Digital Press) NOTE: For the HP Indigo WS6000 Digital Press use the Transparency jig (CA098-00060). NOTE: If necessary see troubleshooting: Skew adjustment (only for the 7000 and W7200 Presses) on page 14. Color adjust Follow the steps below to adjust the color. NOTE: Before continuing, make sure that the press has been in Ready state for at least one hour. 1. Verify that the screen is set to HDI-175. 2. Click Main Menu > Problem Handling > HP Indigo Print Care > Component Service > Writing Head > Installation of Writing Head with Manual Interface. Color adjust 9
Figure 2-9
Writing Head and Paper handling skew calibration job (for the HP Indigo 7000 Digital Press)
NOTE:
For the HP Indigo WS6000 Digital Press use the Transparency jig (CA098–00060).
NOTE:
If necessary see troubleshooting:
Skew adjustment (only for the 7000 and W7200 Presses)
on page
14
.
Color adjust
Follow the steps below to adjust the color.
NOTE:
Before continuing, make sure that the press has been in Ready state for at least one hour.
1.
Verify that the screen is set to
HDI-175
.
2.
Click
Main Menu > Problem Handling > HP Indigo Print Care > Component Service > Writing Head >
Installation of Writing Head with Manual Interface
.
Color adjust
9