HP Indigo ws4500 Rewinder Service - Page 29
Rewinder Feedback Cable, and to its connector in the rewinder electrical cabinet.
View all HP Indigo ws4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
13. Tighten the tensor screw, until the tension in the gear belt is in the range of: 999Nm / 195Hz (min) to 1100Nm / 204Hz (max). Refer to document CA345-56346. 14. Disconnect the green encoder cable from its connector, and dispose of it. 15. Connect the new green encoder cable ("Rewinder Feedback Cable", CA341-79140), to the servo motor, and to its connector in the rewinder electrical cabinet. 26 Chapter 2 Procedures
13.
Tighten the tensor screw, until the tension in the gear belt is in the range of: 999Nm / 195Hz (min) to
1100Nm / 204Hz (max). Refer to document CA345-56346.
14.
Disconnect the green encoder cable from its connector, and dispose of it.
15.
Connect the new green encoder cable (“
Rewinder Feedback Cable
”,
CA341-79140
), to the servo motor,
and to its connector in the rewinder electrical cabinet.
26
Chapter 2
Procedures