HP J4899B User Manual - Page 26
Mount the Switch, Warning, Equipment, Cabinet
View all HP J4899B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installing the Switch 2650 Installation Procedures 4. Mount the Switch After you have verified that the switch passes self test, you are ready to mount the switch in a stable location. The Switch 2650 can be mounted in these ways: ■ in a rack or cabinet ■ on a horizontal surface ■ on a wall Warning Rack or Cabinet Mounting The Switch 2650 is designed to be mounted in any EIA-standard 19-inch telco rack or communication equipment cabinet. Note that the mounting brackets have multiple mounting holes and can be rotated allowing for a wide variety of mounting options. For safe operation, please read the mounting precautions on page 2-3, before mounting a switch. Equipment Cabinet Note The 12-24 screws supplied with the switch are the correct threading for standard EIA/TIA open 19-inch racks. If you are installing the switch in an equipment cabinet such as a server cabinet, use the clips and screws that came with the cabinet in place of the 12-24 screws that are supplied with the switch. Complete step 1, on the next page. Then, plan which four holes you will be using in the cabinet and install all four clips and partially install the two bottom screws, as described in step 2 on the following page. Then proceed to step 3. Installing the Switch 2650 2-10