HP LC2000r HP NetRAID 1M/2M Installation & Configuration - Page 100
Defaults option in HP NetRAID Express Tools to disable
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Chapter 7 Preparing for Online Capacity Expansion I. Enable Virtual Sizing NOTE Clearing a previous configuration does not reset the virtual sizing setting for a logical drive. Use the Reset to Factory Defaults option in HP NetRAID Express Tools to disable virtual sizing for all logical drives, or manually change the setting as described below. 1. Restart the host HP Netserver, and watch for the message: Option: Experienced users may press for HP NetRAID Express Tools now. Firmware Initializing 2. When the message is displayed, press . When the system stops scanning, HP NetRAID Express Tools starts and displays the Tools Management menu. 3. If there is more than one HP NetRAID-1M or 2M adapter installed (including any integrated HP NetRAID controller), do the following to select the integrated controller or adapter controlling a logical drive you want to prepare for expansion: a. Choose Adapter from the Tools Management menu. b. Choose the adapter controlling the logical drive. 4. Choose Objects from the Tools Management menu. 5. Choose Logical Drive from the Objects menu. 6. From the Logical Drive menu, choose the logical drive you want to prepare for expansion. 7. From the Logical Drive menu for the drive you want to prepare, choose Properties. 8. Choose Virtual Sizing. 9. On the Virtual Size menu, choose Enable, and confirm your choice. 10. Press Esc twice to return to the Logical Drive menu. If you need to enable virtual sizing on another logical drive, choose the logical drive and repeat steps 6 through 10. 92