HP LC2000r HP NetRAID 1M/2M Installation & Configuration - Page 97
and confirm your
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 7 Preparing for Online Capacity Expansion 1. Restart the host HP Netserver, and watch for the message: Option: Experienced users may press for HP NetRAID Express Tools now. Firmware Initializing 2. When the message is displayed, press . When the system stops scanning, HP NetRAID Express Tools starts and displays the Tools Management menu. 3. If there is more than one HP NetRAID-1M or 2M adapter installed (including any integrated HP NetRAID controller), do the following to select the integrated controller or adapter controlling a logical drive you want to prepare for expansion: a. Choose Adapter from the Tools Management menu. b. Choose the adapter controlling the logical drive. 4. Choose Objects from the Tools Management menu. 5. Choose Logical Drive from the Objects menu. 6. From the Logical Drives menu, choose the logical drive you want to prepare for expansion. 7. From the Logical Drive menu for the drive you want to prepare, choose Properties. 8. Choose Virtual Sizing. 9. On the Virtual Size Feature menu, choose Disable, and confirm your choice. 10. Press Esc twice to return to the Logical Drive menu. If you need to disable virtual sizing on another logical drive, choose the logical drive and repeat steps 6 through 10. 11. If there is more than one HP NetRAID-1M or 2M adapter installed (including any integrated HP NetRAID controller), press Esc to return to the Objects menu. Disable virtual sizing on the logical drives of all adapters as necessary. 12. To exit, press Esc until you see the Exit? box, then choose Yes. 89