HP LC2000r HP NetRAID 1M/2M Installation & Configuration - Page 118
Determine where to Install HP NetRAID Assistant, Identify the Registration Server/Client, HP NetRAID
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Chapter 9 Managing Servers Over the Network Determine where to Install HP NetRAID Assistant HP NetRAID Assistant can be installed on any client running Microsoft Windows NT, Windows 2000, or Windows 95/98. HP NetRAID Assistant can be installed on any server running Microsoft Windows NT or Windows 2000. Identify the Registration Server/Client Only one server or client on the network can be identified as the Registration Server. The Registration Server does not have to be the same server or client that is running HP NetRAID Assistant. The HP NetRAID Registration Server utility can be installed on only one server running Microsoft Windows NT, Windows 2000, or Novell NetWare. The HP NetRAID Registration Server utility can be installed on only one client running Microsoft Windows NT, Windows 2000, or Windows 95/98. HP NetRAID Network Utilities to Install For each client or server, refer to Table 9-1 to determine which HP NetRAID utilities to install on it, as indicated by an X in Table 9-1. All clients and servers should be running HP NetRAID network utilities upgraded to the versions on the most recent HP Netserver Navigator CD-ROM. • HP NetRAID remote management is now done through NetWare Sockets for NetWare 4.x and NetWare 5.x. (RPC was previously used under NetWare 4.x.) Be sure to upgrade all existing HP NetRAID remote management installations, as well as the HP NetRAID Assistant utility. • All Windows NT, Windows 2000, and Windows 95/98 clients and servers should be running the versions of the HP NetRAID utilities supplied on the current HP Netserver Navigator CD-ROM. If they are not running the same versions, some clients and servers may not be able to communicate with each other. 110