HP LC2000r HP NetRAID 1M/2M Installation & Configuration - Page 157
AHP NetRAID-1M Specifications
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
A Adapter Specifications HP NetRAID-1M Specifications Parameter Product Number Card Size Processor Bus Type PCI Edge Connector Bus Data Transfer Rate BIOS Cache Configuration Firmware Nonvolatile RAM Operating Voltage SCSI Controllers SCSI Data Transfer Rate SCSI Bus SCSI Termination Termination Disable Devices per SCSI Channel SCSI Device Types Supported SCSI Channels RAID Levels Supported SCSI Connectors Multiple Cards Battery Backup P3410A Specification 6.875" x 4.2" (half length PCI) Intel i960RM™ @ 100 MHz PCI 2.1/2.2 - 32-bits @ 33 MHz 3 V or 5 V (Universal) Up to 132-MB per second HP NetRAID BIOS 32-MB SDRAM DIMM with ECC 1-MB flash ROM 32-KB of NVRAM for disk configuration space 5.00 V ± 0.25 V QLogic ISP10160 Up to 160-MB/sec with Ultra3 drives; 80-MB/sec with Ultra2 drives; 40-MB/sec with Ultra drives Low voltage differential or single-ended SCSI Active Automatic through cable detection Up to 12 depending on SCSI mode and storage cabinet Low voltage differential or single-ended SCSI disk drives One 0, 1, 5,10, and 50 One 68-pin, high-density internal connector One 68-pin, ultra-high-density external connector Up to six HP NetRAID adapters per system No battery 149