HP LC2000r HP NetRAID 1M/2M Installation & Configuration - Page 92
On the Virtual Size Feature menu, choose
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Chapter 7 Preparing for Online Capacity Expansion 4. Choose Objects from the Tools Management menu. 5. Choose Logical Drive from the Objects menu. 6. From the Logical Drives menu, choose the logical drive you want to prepare for expansion. 7. From the Logical Drive menu for the drive you want to prepare, choose Properties. 8. Choose Virtual Sizing. 9. On the Virtual Size Feature menu, choose Enable, and confirm your choice. 10. Press Esc twice to return to the Logical Drive menu. If you need to enable virtual sizing on another logical drive, choose the logical drive and repeat steps 6 through 10. 11. If there is more than one HP NetRAID-1M or 2M adapter installed (including any integrated HP NetRAID controller), press Esc to return to the Objects menu. Enable virtual sizing on the logical drives of all adapters as necessary. 12. To exit, press Esc until you see the Exit? box, then choose Yes. NOTE Clearing a previous configuration does not reset the virtual sizing setting for a logical drive. Use the Reset to Factory Defaults option in Express Tools to disable virtual sizing for all logical drives, or manually change the setting. II. Create the NetWare Partition 1. Start NetWare 4.2. 2. Type NetWare load install. 3. Select Standard Disk Options. 4. Select Modify Disk Partitions and Hot fix. 5. The Available Devices are displayed. For an initial installation, only Free Space will be displayed. Select Create NetWare disk partition to create a NetWare partition on the logical drive (which has virtual sizing enabled). The partition size will be 144 GB. Press Enter. 84