HP LC2000r HP NetRAID 1M/2M Installation & Configuration - Page 149
Error: Following SCSI Disk not found and No Empty Slot Available for mapping
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Chapter 14 Troubleshooting Drives not found at correct positions. Drive Roaming done. Problem: The physical drives connected to one channel were moved to another channel on the same adapter and the firmware was able to automatically resolve and update the configuration. Solution: This is just a warning message, and there is nothing to be done. Adapter(s) Swap detected for Cluster/NonCluster mismatch Problem: Drives connected to a channel on one adapter were moved to another channel on different adapter and the firmware may or may not be able to resolve and update the configuration. Solution: This is treated as a NVRAM mismatch error and the solution is same as when the following error message is displayed (described above): Configuration of NVRAM and drives mismatch for Host Adapter - x (Normal Mismatch) Run View/Add/Delete Configuration option of Configuration Utility. Press any key to enter the Configuration Utility. Error: Following SCSI Disk not found and No Empty Slot Available for mapping it Problem: The physical disk roaming feature failed to find the physical drive with the listed SCSI ID, and no slot is available in which to map the physical drive. The controller cannot resolve the physical drives into a current configuration. Suggested solution: Reconfigure the array because the adapter cannot resolve the physical drives into the current configuration. Following SCSI ID's have the same data Channel-x:a.b.c Problem: The physical disk roaming feature found the same data on two or more physical drives on channel (x) with the listed SCSI IDs (a, b, c, and so on). The adapter cannot determine which drive with duplicate information to use. Suggested solution: Remove the drive or drives that should not be used. 141