HP LC2000r HP NetRAID 1M/2M Installation & Configuration - Page 125
Novell NetWare Server Installation Instructions
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 9 Managing Servers Over the Network Novell NetWare Server Installation Instructions NOTE All NetWare servers that contain HP NetRAID-1M or 2M adapters that will be managed by HP NetRAID Assistant must be running the same version of NetRAID Software-NetWare. Be sure to update any existing installations. The client or server managing these HP NetRAID adapters must be running HP NetRAID Assistant version A.02.02 or newer. For each server operating under Novell NetWare and containing an integrated HP NetRAID controller or HP NetRAID-1M or 2M adapter to be managed over the network, install NetRAID Software-NetWare as follows: 1. For NetWare 4.2 only, the file rpcbstub.nlm is a read-only file. This file attribute must be changed to read/write before installing the NetRAID Software-NetWare on a client connected to NetWare through the network. Exit to the DOS prompt and change the file attribute to r/w with the attrib command. The file is located in the \system\ directory of NetWare on the SYS volume. 2. Start the NetWare server and insert the "NetRAID Software-NetWare" diskette. 3. At the NetWare console prompt, type load a:\raidinst.nlm 4. Choose Install Package. 5. To the question "Install registration server?" select yes or no. ◊ Select yes if you want this server to be the Registration Server. ◊ Select no if this server will not be the Registration Server. Enter the name of the Registration Server when prompted. 6. Files are copied. NOTE For NetWare 4.2, if you get the error message "Not able to create SYS:SYSTEM\RPCBSTUB.NLM," go back to Step 1 and change the file attribute to r/w. 117