HP LH4r HP Netserver LD Pro User Guide - Page 35
To Install the UPS Software on the HP NetServer
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 5 Installing UPS Software To Install the UPS Software on the HP NetServer NOTE You must have administrator capabilities to install this software. Install the HP PowerWise Assistant application on the HP NetServer to which the UPS is connected and on a local Windows client used to manage the server. With Novell NetWare, you can have more than one server connected to a UPS. The server to which the UPS is connected via the serial cable is the "Master" server. Other servers powered by the UPS are "Slave" servers. To install the UPS Software, perform the following steps: 1. Insert the HP NetServer Navigator CD-ROM into the CD-ROM drive that is accessible from the Windows client. 2. In the Windows Program Manager, select Run from the File dropdown menu. 3. At the Command Line prompt, type the following: {drive}:\PWA\NETWARE\DISK1\SETUP.EXE where {drive} is the letter of the CD-ROM drive. 4. Follow the instructions on the screen. ◊ You will be prompted to identify an installation path for the software. ◊ In the Installation Options window, select PowerWise Assistant. ◊ You will need to identify the server as a Master or a Slave. For the Master server, you must identify the port on the server to which the HP PowerWise UPS is connected. For a Slave server, you must provide the name of the Master. 5. Depending on your installation choices, one or more of the following commands are added to the AUTOEXEC.NCF file: load aiocomx load hpups load hpslave load hpupscag load hpupssd Either reboot the server to load these files, or manually load them by entering pwaload at the server console. 29