HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP - User Guide - Page 226

Solve repeated jams,

Page 226 highlights

4. Push the 8-bin mailbox back into place, and then reattach the upper bin. Figure 12-68 Clear jams in the 8-bin mailbox (3 of 3) NOTE: Check that the paper used is not thicker than the 8-bin mailbox supports. See Supported paper and print media sizes on page 81. Solve repeated jams Situation General repeated jam problems Repeated jams in the ADF Solution 1. Verify that the media is correctly loaded in the trays and that all width guides are correctly set (see Print tasks on page 97). 2. Verify that the paper tray is set for the size of media installed and that the tray is not overloaded. 3. Try turning over the stack of media in the tray. If you are using prepunched or letterhead paper, try printing from tray 1. 4. Do not use previously printed media or torn, worn, or irregular media. For recommended media for your MFP, see Supported paper and print media sizes on page 81. 5. Check the media specifications. (See Supported paper and print media sizes on page 81.) If media is outside of the recommended specifications, problems can occur. 6. MFP might be dirty. Clean the MFP as described in Clean the MFP on page 170. 7. Check that all damaged or jammed media is removed from MFP. 1. The ADF might be dirty. Clean the ADF as described in Clean the ADF delivery system on page 172. NOTE: If jams continue, contact your HP-authorized service provider. (See the HP support flyer or go to www.hp.com/support/ljm9040mfp or www.hp.com/support/ljm9050mfp.) 212 Chapter 12 Problem solve ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288

4.
Push the 8-bin mailbox back into place, and then reattach the upper bin.
Figure 12-68
Clear jams in the 8-bin mailbox (3 of 3)
NOTE:
Check that the paper used is not thicker than the 8-bin mailbox supports. See
Supported paper
and print media sizes
on page
81
.
Solve repeated jams
Situation
Solution
General repeated jam problems
1. Verify that the media is correctly loaded in the trays and that
all width guides are correctly set (see
Print tasks
on page
97
).
2. Verify that the paper tray is set for the size of media installed
and that the tray is not overloaded.
3. Try turning over the stack of media in the tray. If you are
using prepunched or letterhead paper, try printing from tray 1.
4. Do not use previously printed media or torn, worn, or
irregular media. For recommended media for your MFP, see
Supported paper and print media sizes
on page
81
.
5. Check the media specifications. (See
Supported paper and
print media sizes
on page
81
.) If media is outside of the
recommended specifications, problems can occur.
6. MFP might be dirty. Clean the MFP as described in
Clean
the MFP
on page
170
.
7. Check that all damaged or jammed media is removed from
MFP.
Repeated jams in the ADF
1. The ADF might be dirty. Clean the ADF as described in
Clean the ADF delivery system
on page
172
.
NOTE:
If jams continue, contact your HP-authorized service provider. (See the HP support flyer or go
to
www.hp.com/
support/ljm9040mfp
or
www.hp.com/
support/ljm9050mfp
.)
212
Chapter 12
Problem solve
ENWW