HP LaserJet MFP M433 User Guide - Page 140
Printing problems, The following table describes common printing problems, the possible causes
View all HP LaserJet MFP M433 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Printing problems The following table describes common printing problems, the possible causes, and suggested solutions. Condition Possible cause Suggested solutions The machine does not print. The machine is not receiving power. Connect the machine to the electricity supply first. If the machine has a Power / Wake Up button on the control, press it. The machine is not selected as the default machine. Select your machine as your default machine in Windows. Check the machine for the following: ● The cover is not closed. Close the cover. ● Paper is jammed. Clear the paper jam. ● No paper is loaded. Load paper. ● The toner cartridge is not installed. Install the toner cartridge. ● Make sure the protective cover and sheets are removed from the toner cartridge. If a system error occurs, contact your service representative. The connection cable between the computer and the Disconnect the machine cable and reconnect it. machine is not connected properly. The connection cable between the computer and the machine is defective. If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different machine cable. The port setting is incorrect. Check the Windows printer settings to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one. The machine may be configured incorrectly. Check the Printing Preferences to ensure that all of the print settings are correct. The printer driver may be incorrectly installed. Uninstall and reinstall the machine's driver. The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating a system error. Contact a service representative. The document size is so big that the hard disk space Get more hard disk space and print the document of the computer is insufficient to access the print job. again. The output tray is full. Once the paper is removed from the output tray, the machine resumes printing. The machine selects print materials from the wrong paper source. The paper option that was selected in the Printing Preferences may be incorrect. For many software applications, the paper source selection is found under the Paper tab within the Printing Preferences. Select the correct paper source. See the printer driver help screen. A print job is extremely slow. The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings. Half the page is blank. The page orientation setting may be incorrect. Change the page orientation in your application. 132 Chapter 11 Troubleshooting ENWW