HP LaserJet MFP M433 User Guide - Page 43
mm, start copying with the scanner lid open., lid. If the book or magazine is thicker than 30
View all HP LaserJet MFP M433 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Place the original face down on the scanner glass. Align it with the registration guide at the top left corner of the glass. 3. Close the scanner lid. NOTE: ● Leaving the scanner lid open while copying may affect copy quality and toner consumption. ● Dust on the scanner glass may cause black spots on the printout. Always keep it clean. ● If you are copying a page from a book or magazine, lift the scanner lid until its hinges are caught by the stopper and then close the lid. If the book or magazine is thicker than 30 mm, start copying with the scanner lid open. CAUTION: ● Be careful not to break the scanner glass. You may get hurt. ● Do not look into the light from inside of the scanner while copying or scanning. It is harmful to eyes. ENWW Loading the original 35