HP LaserJet Pro M1536 HP LaserJet Pro M1530 - User Guide - Page 31
Network Setup menu, TCP/IP Config - service manual
View all HP LaserJet Pro M1536 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Menu item Archive Print Firmware Date Restore Defaults Sub-menu item On Off Description When printing pages that will be stored for a long time, this option sets the product to a mode that reduces toner smearing and dusting. The default setting is Off. Displays the current firmware date code. Sets all settings to the factory default values. Network Setup menu Menu item TCP/IP Config Sub-menu item Automatic Manual Auto Crossover Network Services Show IP Address Link Speed Restore Defaults On Off IPv4 IPv6 Yes No Automatic 10T Full 10T Half 100TX Full 100TX Half Description Automatic automatically configures all the TCP/IP settings via DHCP, BootP or AutoIP. Manual requires you to manually configure the IP address, subnet mask, and default gateway. The control panel prompts you to specify values for each address section. Use the arrow buttons to increase or decrease the value. Press the OK button to accept the value and move the cursor to the next field. As each address is completed, the product prompts for address confirmation before moving to the next one. After all three addresses are set, the product automatically restarts. Sets the auto crossover function. Sets whether the product will use either IPv4 or IPv6 protocol. Sets whether the product displays the IP address on the control panel. Sets the link speed manually if needed. After setting the link speed, the product automatically restarts. Resets all network configurations to their factory defaults. ENWW Setup menu 17